|
|
|
Dual
Laser Light Source 1310nm/1550nm
It is a stabilized switchable wavelength laser light source
instrument for field or laboratory testing of fiber optic
system. It features excellent accuracy in both wavelengths
and also high performance source for SMF testing. RS232
port is provided for external control using a PC.
|
|
|
|
Optical
Power Meter
It is a
light Weight Hand Held Battery / AC Mains operated
Optical Power Meter of Wavelength between 1100nm to
1650nm. RS-232C port is provided for on site-
documentation using a PC or external control. It
Indicates the Laser Power with CW and Modulated
frequencies of 270Hz, 1KHZ and 2KHz.
|
|
|
|
Optical
Variable Attenuator
This highly accurate optical variable attenuator - 735
designed for laboratory & field use during
measurement of Optical power, Optical loss, Transmission
rate, Optical transmission characteristics.
|
|
|
|
Ultrastable
Laser Light Source -1310nm
Laser Light Source instrument for field or laboratory
testing of fiber optic systems. It features excellent
accuracy and high performance source for SMF testing.
The
RS232c port is useful for external control using a PC.
|
|
|
|
Ultrastable
Laser Light Source - 1550nm
Laser Light Source instrument for field or laboratory
testing of fiber optic systems. It features excellent
accuracy and high performance source for SMF testing. The
RS232c port is useful for external control using a PC.
|
|
|
|
Electronic Markers
These are passive transponders and are designed for the
electronic marking of a buried cable. the pegs are buried
during the backfill near key points of any below ground
utility that may require future access. 8 feet marker/6
feet marker.
|
|
|
|
Optical Talk Set
For single mode long distance communications, 3
party simultaneous communication, Clipping communication
without cutting fiber, Fiber ID function with generator.
|
|
|
|
Low Insulation Fault Locator 3 AT
Using 3AT,
low insulation faults from 0 To 10 Mega ohms can be
detected and faults upto 2 Mega Ohms can be located with
an accuracy upto +/- 0.5% by using Potential
Distribution Method. This unit is also capable of
detecting Contact Fault, Single Limb Fault, Earth Fault,
Potential Fault.
|
|
|
|
Universal Fault Locator.
This unit functions in two switchable modes TDR
(Time Domain Reflectometer) and LIFL (Potential
Distribution Method) having the measuring range of 0 TO
15Kms,with an accuracy of +/- 0.5% of measuring range
and resolution of 1% of measuring range.
|
|
|
|
Cable Fault Locator (TDR)
This is an advanced "METALLIC TIME DOMAIN
REFLECTOMETER" capable of accurately locating and recognizing
faults in multipair telecommunication cable
upto 5 kms and also identifies and locates Short, Open,
Crosses, Grounds, Splits, Water, Taps, Loadcoils,
Bridge, with an accuracy of +/- 0.5% of measuring range
and resolution of 1% of measuring range.
|
|
|
|
